REPSA Yellow Coat

PVC Coated GUBB Cast junction boxes

Description

GUBB junction boxes are used in conduit systems within hazardous areas to make splices and branches of conductors.
A wide range of threaded conduit entries in size and location allows for great flexibility of use.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeves to guarantee the sealing of the threaded (optional).
  • Made of copper-free aluminum (4/10 of 1% max) resistant to stress, and malleable iron.
  • Safety Cover lid securing system (optional) with high tensile strength monofilament (180 lbs.) and high corrosion resistance.
  • All junction boxes are supplied with a cover made of the same material as the box, and a rainproof neoprene O’ring.
  • Wide selection of sizes and locations for threaded conduit entries.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Certifications and compliances.

Download data sheet

GUBB Junction box series with PVC exterior coating and yellow urethane interior

Ordering Information

WP Table Builder

To order boxes with the Safety Cover system, add the suffix “SC” to the end, eg: RYC-GUBB22ASC.

Specify this product in your project:

GUBB Junction box series (specify material: copper-free aluminum or malleable iron), for Class I, Division 1 and 2, Groups B, C and D areas; Class II, Division 1 and 2, Groups E, F and G; Class III, NEMA 3, 3R, 4, 7BCD, 9EFG, (specify width x height x depth, e.g.: 12” x 12” x 7.75”), with PVC exterior coating and yellow urethane interior, REPSA Yellow Coat®.