Menu
Hazardous areas elbows with PVC exterior coating and Urethane interior are installed to the conduit system to change direction at 90° or 45°, or to connect to a fitting or box. Available with male thread, female thread, or male and female thread.
80-84 (Shore A Durometer).
400 Volts/Mil at 60 cycles.
1000 hours (Atlas wet UV chamber).
200% min.
Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).
PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).
Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.
ELF Explosion proof Elbows with exterior PVC coating, and interior with yellow urethane,
| Diámetro en pulg. | 90° | 45° | ||
| Catálogo en Aluminio | Catálogo en Hierro maleable | Catálogo en Aluminio | Catálogo en Hierro maleable | |
| 1/2” | RYC-ELF9050A | RYC-ELF9050 | RYC-ELF4550A | RYC-ELF4550 |
| 3/4” | RYC-ELF9075A | RYC-ELF9075 | RYC-ELF4575A | RYC-ELF4575 |
| 1” | RYC-ELF90100A | RYC-ELF90100 | ---- | RYC-ELF45100 |
| 1-1/4” | RYC-ELF90125A | RYC-ELF90125 | ---- | RYC-ELF45125 |
For 1-1/2” and 2” diameter elbows, consult your distributor.
ELF Explosion proof Elbows (specify angle: 90° or 45°) for conduit pipe, made of (specify material: copper-free aluminum or malleable iron), for Class I areas, Division 1 and 2, Groups A, B, C and D; Class II, Division 1 and 2, Groups E, F and G; Class III, (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating, and interior with yellow urethane, REPSA Yellow Coat®.
Subscribe to our newsletter to receive up-to-date news and articles about the company.
Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.