• +52 442 189 4682
  • contacto@repsapvc.com
Icon-facebook Icon-instagram-1 Icon-linkedin Twitter

CONTROL STATIONS

Description

The control stations with exterior PVC coating and interior yellow urethane are used for manual starting of AC or DC motors, status indicators presented by the motors through pilot lights and selection of starting mode of field engines.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeves to ensure sealing.
  • Made of copper-free aluminum (4/10 of 1% max) resistant to stress, and malleable iron.
  • 10 Amp., 600 Vac. maximum.

Applications.

  • Push buttons and selector switches are used in conjunction with contactors or magnetic starters for remote motor control.
  • They provide control and/or selection of circuits.
  • Pilot lights provide visual assurance that an electrical function is being performed at a remote or local location.
  • EFD/EFDB control stations limit device arcing within the enclosure, preventing ignition of flammable atmospheres during control operation of motors and other equipment.
  • It is used in classified areas where highly combustible vapors, gases or dusts are present.
    For installation in chemical and petrochemical plants, refineries and other process industries.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Certifications and compliances.
  • Class I, Div. 1 and 2, Groups B,C,D
  • Class II, Div. 1 and 2, Groups E,F,G
  • Class III
  • NEMA 3, 7CD, 9EFG
  • UL standard: UL 508, UL 698, UL 1203.
  • NEMA RN1

Download data sheet

EFD/EFDB Control station with exterior PVC coating and interior with yellow urethane.

download

EFDB Push Button Stations

WP Table Builder

† Malleable iron boxes and aluminum covers, to order aluminum boxes add the suffix “A” at the end, eg: RYC-EFDB175UM1A.
‡ Only malleable iron boxes.

Specify this product in your project:

Control station with push button start/stop, made of (specify material: copper-free aluminum or malleable iron), for Class I, Division 1 and 2, Groups B, C and D areas; Class II, Division 1 and 2, Groups E, F and G; Class III, NEMA 3, 7CD, 9EFG, 10 Amp., 600 Vac. Maximum, in box (specify Dead - End or Feed - Thru), of (specify diameter, e.g.: 3/4”Ø), of (select number of circuits, e.g.: 1 universal circuit), contact (specify momentary or sustained*) , with exterior PVC coating and interior with yellow urethane, and stainless steel screws, REPSA Yellow Coat®.
*Mushroom head only.

EFD Push button and pilot light station

WP Table Builder

† Malleable iron boxes and aluminum covers, to order aluminum boxes add the suffix “A” at the end, eg: RYC-EFDB150J1U1A.
‡ Only malleable iron boxes.

Specify this product in your project:

Control station with push button start/stop and pilot light, made of (specify material: copper-free aluminum or malleable iron), for Class I, Division 1 and 2, Groups B, C and D areas; Class II, Division 1 and 2, Groups E, F and G; Class III, NEMA 3, 7CD, 9EFG, 10 Amp., 600 Vac. Maximum, in box (specify Dead - End or Feed - Thru), of (specify diameter, e.g.: 3/4”Ø), of (select number of circuits and pilot lights, e.g.: 1 universal circuit and 1 pilot light*), with exterior PVC coating and interior with yellow urethane, and stainless steel screws, REPSA Yellow Coat®.
*Specify pilot light color (Amber, Red, Green).

Newsletters

Subscribe to our newsletter to receive up-to-date news and articles about the company.

Navigation

Products

Resources

Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.

  • 70 El Marqués Avenue, Unit 1, Bernardo Quintana industrial park, El Marqués, Qro. MX 76246.
  • +52 442 189 4682
  • contacto@repsapvc.com

Copyright © 2024 Recubrimientos Plásticos del Sureste S.A. de C.V. All rights reserved