Menu
They provide an easy change of direction in places where space is limited.
ELBY type pulling elbows are strong and compact, and have a soft interior that allows cables to pass through without damaging their coating.
80-84 (Shore A Durometer).
400 Volts/Mil at 60 cycles.
1000 hours (Atlas wet UV chamber).
200% min.
Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).
PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).
Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.
ELBY pulling elbows with threaded cover with exterior PVC coating and interior with yellow urethane
| Diámetro del tubo en pulg. | Catálogo en Hierro maleable | Catálogo en Aluminio |
| 1/2” | RYC-ELBY50 | RYC-ELBY50A |
| 3/4” | RYC-ELBY75 | RYC-ELBY75A |
| 1” | RYC-ELBY100 | RYC-ELBY100A |
| 1-1/4” | RYC-ELBY125 | RYC-ELBY125A |
In Class I, Division 1, Group B atmospheres, all conduit runs must have a sealing fitting (not included) field installed adjacent to the enclosure.
ELBY pulling elbows with threaded cover, made of (specify material: copper-free aluminum or malleable iron), for Class I, Division 1 and 2, groups B, C and D areas; Class II, Division 1 and 2, groups E, F and G; Class III, (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.
Subscribe to our newsletter to receive up-to-date news and articles about the company.
Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.