Menu
ELBD pulling elbows are installed to make 90° direction changes in conduit systems, to allow straight pulling into elbows and facilitate the pulling of conductors who need greater space for the curvature radius thanks to its elbowed dome-type cover. They also serve as service entrances in buildings.
80-84 (Shore A Durometer).
400 Volts/Mil at 60 cycles.
1000 hours (Atlas wet UV chamber).
200% min.
Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).
PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).
Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.
ELBD Pulling elbows with exterior PVC coating and interior with yellow urethane.
| Diámetro del tubo en pulg. | Catálogo en Hierro maleable | Catálogo en Aluminio |
| 1/2” | RYC-ELBD50 | RYC-ELBD50A |
| 3/4” | RYC-ELBD75 | RYC-ELBD75A |
| 1” | RYC-ELBD100 | RYC-ELBD100A |
| 1-1/4” | RYC-ELBD125 | RYC-ELBD125A |
| 1-1/2” | RYC-ELBD150 | RYC-ELBD150A |
| 2” | RYC-ELBD200 | RYC-ELBD200A |
| 2-1/2” | RYC-ELBD250 | RYC-ELBD250A |
| 3” | RYC-ELBD300 | RYC-ELBD300A |
| 4” | RYC-ELBD400 | RYC-ELBD400A |
For special sizes, consult your distributor.
ELBD Pulling elbows, made of (specify material: copper-free aluminum, or malleable iron), for Class I, Division 1 and 2, group D areas; Class II, Division 1 and 2, groups E, F and G and Class III; (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, includes stainless steel screws, REPSA Yellow Coat®.
Subscribe to our newsletter to receive up-to-date news and articles about the company.
Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.