• +52 442 189 4682
  • contacto@repsapvc.com
Icon-facebook Icon-instagram-1 Icon-linkedin Twitter

ST LIQUIDTIGHT CONNECTOR

Description

Liquidtight connectors are used together with liquidtight tube for wiring motors, transformers, pumps, machine tools, etc. The liquidtight tube and the PVC-coated connector work together to prevent the entrance of water or other corrosive liquids inside, protecting the conductors from risk or damage.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeve to ensure sealing.
  • Commercial sizes from 1/2¨ to 4” in diameter.
  • Available in straight type, 45º angle and 90º angle.
  • Manufactured in copper-free aluminum (4/10 of 1% max) and steel.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Conector Liquidtight recto a 45° o curvo a 90° a prueba de líquidos fabricado en aluminio libre de cobre, Clase I Div. 2, con recubrimiento exterior de PVC e interior con uretano amarillo, marca REPSA Yellow Coat®.
Certifications and compliances.
  • Class I Div. 2
  • UL Standard: 514B.
  • NEMA RN1

Download data sheet

Liquidtight connector with exterior PVC coating and interior with yellow urethane

download

Ordering Information

WP Table Builder

† Special sizes, supplied upon request.

Specify this product in your project:

Liquidtight connector (specify model: straight, 45° or 90°, in galvanized steel) made of copper-free aluminum, Class I Div. 2, of (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.

Newsletters

Subscribe to our newsletter to receive up-to-date news and articles about the company.

Navigation

Products

Resources

Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.

  • 70 El Marqués Avenue, Unit 1, Bernardo Quintana industrial park, El Marqués, Qro. MX 76246.
  • +52 442 189 4682
  • contacto@repsapvc.com

Copyright © 2024 Recubrimientos Plásticos del Sureste S.A. de C.V. All rights reserved