REPSA Yellow Coat

Description

Locations where receptacles are used with stationary or portable electrical devices, such as:
• Illumination systems
• Conveyors
• Heaters
• Motor generator sets
• Air conditioners
• Compressors
• bombs
Locations with humid or corrosive conditions
Class I: classified places where flammable vapors or gases are present such as:
• Petrochemical plants
• Oil refineries
• Paint and chemical plants.
Class II: locations classified as:
• Process industries where there is a risk of dust when handling products such as flour, grains and starch or anywhere where there are flammable quantities of dust or quantities that would adversely affect performance.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeves to ensure sealing.
  • Receptacle and cover made of copper-free aluminum (4/10 of 1% max)
    resistant to effort.
  • Malleable iron mounting box.
  • Compatible with plugs from other brands.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Receptáculo EFS de 20 Amperes a prueba de explosión con recubrimiento de PVC REPSA Yellow Coat®
Certifications and compliances.

Download data sheet

20 Amp Receptacle. Div. 1 with exterior PVC coating and interior REPSA Yellow Coat® Urethane

Ordering Information

WP Table Builder

† Boxes are supplied in malleable iron as standard, to order boxes in copper-free aluminum add the suffix “A” at the end,
example.: RYC-EFS1502023A.

Specify this product in your project:

20 Amp EFS receptacle, made of (specify material: copper-free aluminum or malleable iron), for Class I, Division 1 and 2, groups B, C and D areas; Class II, Division 1 and 2, groups F and G; Class III, 2 Wires 3 Poles, in box (specify terminal or passage), of (specify diameter, e.g.: 3/4”Ø), for (select capacity, e.g.: 125 Vac, 1 HP) with exterior coating PVC and interior with yellow urethane, and encapsulated stainless steel screws, REPSA Yellow Coat® brand.