Menu
Locations where plugs are used with stationary or portable electrical devices, such as:
• Illumination systems
• Conveyors
• Heaters
• Motor generator sets
• Air conditioners
• Compressors
• bombs
Locations with humid or corrosive conditions
Class I: classified places where flammable vapors or gases are present such as:
• Petrochemical plants
• Oil refineries
• Paint and chemical plants.
Class II: locations classified as:
• Process industries where there is a risk of dust when handling products such as flour, grains and starch or anywhere where there are flammable quantities of dust or quantities that would adversely affect performance.
80-84 (Shore A Durometer).
400 Volts/Mil at 60 cycles.
1000 hours (Atlas wet UV chamber).
200% min.
Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).
PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).
Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.
20 Amp plug. Div. 1 with exterior PVC coating and interior with yellow urethane
| Amp. | Diagram | Wire / Pole | Cable Dia., (inches) | Catalog number 125 Vca, 1 HP | Catalog number 250 Vca, 2 HP |
| 20 |  | 2W, 3P | 0.538 A 0.639 | RYC-ECP2023 | |
| 20 | | 2W, 3P | 0.538 A 0.639 | RYC-ECP20232 |
20 Amp ECP plug, made of copper-free aluminum, for Class I, Division 1 and 2, Groups B, C and D areas; Class II, Division 1 and 2, Groups F and G; Class III, for cable from 0.538” to 0.639”, 2 Wires 3 Poles, for (select capacity, e.g.: 125 Vac, 1 HP) with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.
Subscribe to our newsletter to receive up-to-date news and articles about the company.
Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.
