Menu
The LBD and LBDN pulling fittings are installed to make 90° direction changes in conduit systems, to allow straight pulling on elbows and facilitate the pulling of conductors that require greater space for the bending radius thanks to their curved dome-type cover. They also serve as a service entrance to buildings or as a conductors entrance to motors.
80-84 (Shore A Durometer).
400 Volts/Mil at 60 cycles.
1000 hours (Atlas wet UV chamber).
200% min.
Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).
PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).
Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.
LBD/LBDN pulling box with PVC exterior coating and REPSA Yellow Coat® interior of yellow Urethane
| Range | Type | Conduit Size inches | Wiring capacity (in3/dm3) | Malleable iron | Aluminium | |
 | 1/2” a 1” | LBD | 1/2” | 4.0/0.07 | RYC-LBD50M | ---- |
| 3/4” | 8.00/0.13 | RYC-LBD75M | ---- | |||
| 1” | 12.00/0.20 | RYC-LBD100M | ---- | |||
 | 1-1/4” a 2” | LBD | 1-1/4” | 37.00/0.61 | RYC-LBD125M | RYC-LBD125A |
| 1-1/2” | 66.00/1.08 | RYC-LBD150M | RYC-LBD150A | |||
| 2” | 81.00/1.33 | RYC-LBD200M | RYC-LBD200A | |||
| 2-1/2” a 4” | LBDN | 2-1/2” | 210.00/3.44 | RYC-LBDN250M | RYC-LBDN250A |
| 3” | 345.00/5.65 | RYC-LBDN300M | RYC-LBDN300A | |||
| 3-1/2”‡ | 500.00/8.19 | RYC-LBDN350M | RYC-LBDN350A | |||
| 4” | 740.00/12.13 | RYC-LBDN400M | RYC-LBDN400A |
*For sizes from 1/2” to 1” encapsulated stainless steel screws.
*For sizes of 1-1/4” and up, stainless steel screws.
Elbow type Pulling fittings for outdoor use, made of copper-free aluminum, or malleable iron, (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane and stainless steel screws , REPSA Yellow Coat®.
Subscribe to our newsletter to receive up-to-date news and articles about the company.
Over 28 years developing effective solutions to corrosion issues in industrial electrical conduit.
