REPSA Yellow Coat

PVC Coated Grounding bushings for rigid metal conduit

Description

Grounded bushings with PVC exterior coating and Urethane interior ensure the installation of conduit pipe at the entrance of enclosures or cast boxes, while grounding the system for greater safety.

Features

  • External PVC coating of 0.040¨ nominal.
  • Yellow urethane protection on the threads.
  • Commercial sizes from 1/2¨ to 4” in diameter.
  • Made of galvanized malleable iron with aluminum or bronze lug and galvanized steel fastening screw.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Monitor para tubo Conduit con recubrimiento exterior de PVC e interior con uretano amarillo, marca REPSA Yellow Coat®
Certifications and compliances.

Download data sheet

Bushing for Conduit made of galvanized malleable iron with exterior PVC coating and interior with yellow urethane, with aluminum ground lug.

Ordering Information

WP Table Builder
WP Table Builder

Specify this product in your project:

Bushing for Conduit made of galvanized malleable iron, (specify diameter, e.g.: 3/4”Ø), with aluminum ground lug, for cable (specify cable range, e.g.: 14 SOL- 4 STR), with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.