REPSA Yellow Coat

PVC Coated EY Vertical and horizontal conduit sealing fittings

Description

Sealing fittings are used in conduit systems to prevent the feed thru of combustion gases and flames from one part of the electrical installation to another, through the conduit; They limit any explosion to the sealed enclosure and prevent compression or pressure buildup in the conduit tubes.
EY styles can be for vertical and horizontal installation.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeves to ensure sealing.
  • Commercial sizes from 1/2¨ to 4” in diameter.
  • Made of Almag 35 aluminum, and malleable iron.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Sello vertical/horizontal tipo EY al 25% a prueba de explosión con recubrimiento de PVC REPSA Yellow Coat®
Certifications and compliances.

Download data sheet

Vertical/horizontal sealing fittings type EY at 25% with exterior PVC coating and interior with yellow urethane.

Ordering Information

WP Table Builder

◊UL listed parts for Class I, Groups A, B, C, D; class II, groups E, F, G; and class III.
♦ UL listed parts for class I, groups B, C, D; class II, groups E, F, G; and class III.
♦ Supplied upon request, consult your distributor for more information.
* 40% seals are also supplied, consult your distributor for more information.

Specify this product in your project:

Vertical/horizontal sealing fittings type EY at 25% with inlets (specify female - female or female - male), of (specify material: Almag 35 aluminum or malleable iron), for Class I areas, Division 1 and 2, Groups A, B, C and D; Class II, Division 1 and 2, Groups E, F and G; Class III, (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.