REPSA Yellow Coat

Description

PVC Coated Couplings connect sections of PVC Coated conduit. PVC sleeves on the couplings seal the conduit pipe entries to prevent attack by corrosive liquids and vapors on the threaded joints and electrical continuity is maintained across the assembled joints.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • PVC sleeves for sealing at both ends.
  • Commercial sizes from 1/2” to 4” in diameter.
  • Schedule 40 galvanized steel and schedule 40 copper-free aluminum, type IPS alloy 6063 T6.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Cople para tubería conduit de aluminio libre de cobre o Acero galvanizado, cédula 40, con recubrimiento exterior de PVC e interior con uretano amarillo, con mangas de PVC para garantizar el sellado, marca REPSA Yellow Coat®.
Certifications and compliances.

Download data sheet

Coupling for conduit pipe with PVC exterior coating and interior yellow Urethane REPSA Yellow Coat®

Ordering Information

WP Table Builder

Special sizes of 5” and 6” diameter are supplied upon request, consult your distributor for more information.

Specify this product in your project:

Coupling for conduit pipe made of copper-free aluminum or galvanized steel, schedule 40, (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, with PVC sleeves to guarantee sealing , REPSA Yellow Coat®.