REPSA Yellow Coat

PVC Coated Rigid Conduit Clamps

Features

  • External PVC coating of 0.040¨ nominal.
  • Commercial sizes from 1/2¨ to 4” in diameter.
  • Right angle and U-bolt clamps: galvanized steel.
  • Parallel and claw clamps: electrogalvanized malleable iron.
  • Encapsulated nuts on right angle and U-bolt type clamps.
  • Corner clamp: electrogalvanized malleable iron.
  • 2 Hole straps: electrogalvanized steel.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Download data sheet

Conduit pipe clamps with PVC coating

Ordering Information

WP Table Builder

Specify this product in your project:

U-Bolt type clamp, for conduit (specify diameter, e.g.: 3/4”Ø), made of Galvanized steel, with PVC coating, includes two encapsulated galvanized steel nuts, REPSA Yellow Coat®.