REPSA Yellow Coat

PVC Coated ELBD 90° Pulling elbows

Description

ELBD pulling elbows are installed to make 90° direction changes in conduit systems, to allow straight pulling into elbows and facilitate the pulling of conductors who need greater space for the curvature radius thanks to its elbowed dome-type cover. They also serve as service entrances in buildings.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeves to ensure sealing.
  • Commercial sizes from 1/2” to 4”
  • The boxes are made of workable iron and copper-free aluminum (4/10 of 1% max).
  • ELBD boxes measuring 2-1/2” to 4” have rollers to facilitate cable pulling.
  • All boxes are supplied with a cover made of the same material as the box, and encapsulated stainless steel screws.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Caja para jalado de cables tipo codo, de aluminio libre de cobre, o hierro maleable, para áreas Clase I, División 1 y 2, grupo D; Clase II, División 1 y 2, grupos E, F y G y Clase III, con recubrimiento exterior de PVC e interior con uretano amarillo, incluye tornillos de acero inoxidable, marca REPSA Yellow Coat®. * Solo en cajas de 2-1/2” a 4”.
Certifications and compliances.

Download data sheet

ELBD Pulling elbows with exterior PVC coating and interior with yellow urethane.

Ordering Information

WP Table Builder

For special sizes, consult your distributor.

Specify this product in your project:

ELBD Pulling elbows, made of (specify material: copper-free aluminum, or malleable iron), for Class I, Division 1 and 2, group D areas; Class II, Division 1 and 2, groups E, F and G and Class III; (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, includes stainless steel screws, REPSA Yellow Coat®.