REPSA Yellow Coat

PVC Coated Liquidtight plain throat connector

Description

Liquidtight connectors are used together with liquidtight tube for wiring motors, transformers, pumps, machine tools, etc. The liquidtight tube and the PVC-coated connector work together to prevent the entrance of water or other corrosive liquids inside, protecting the conductors from risk or damage.

Features

  • External PVC coating of 0.040¨ nominal.
  • 0.002¨ nominal yellow urethane interior coating.
  • Yellow urethane protection on the threads.
  • With PVC sleeve to ensure sealing.
  • Commercial sizes from 1/2¨ to 4” in diameter.
  • Available in straight type, 45º angle and 90º angle.
  • Manufactured in copper-free aluminum (4/10 of 1% max) and steel.

Exterior coating features

Hardness.

80-84 (Shore A Durometer).

Dielectric strength.

400 Volts/Mil at 60 cycles.

Aging.

1000 hours (Atlas wet UV chamber).

Elongation.

200% min.

Temperature.

Polyvinyl chloride has a crystallization temperature of 5° F (-15° C).

Flammability.

PVC coating will burn if exposed to continuous flame or heat above 400°F (204°C).

Toxicity.

Prolonged exposure to temperatures greater than 200°F (93°C) or fire may cause the PVC coating to release emissions potentially hazardous to the health of those exposed to them.

Conector Liquidtight recto a 45° o curvo a 90° a prueba de líquidos fabricado en aluminio libre de cobre, Clase I Div. 2, con recubrimiento exterior de PVC e interior con uretano amarillo, marca REPSA Yellow Coat®.
Certifications and compliances.

Download data sheet

Liquidtight connector with exterior PVC coating and interior with yellow urethane

Ordering Information

WP Table Builder

† Special sizes, supplied upon request.

Specify this product in your project:

Liquidtight connector (specify model: straight, 45° or 90°, in galvanized steel) made of copper-free aluminum, Class I Div. 2, of (specify diameter, e.g.: 3/4”Ø), with exterior PVC coating and interior with yellow urethane, REPSA Yellow Coat®.